Home>Products>CAT injector>CAT 5I-7523 injector
CAT 5I-7523 injector
category
CAT injector
CAT 5I-7523 SPECIFICATIONS
100% GAS Pump Technology Co.,Ltd Authentic. CAT 5I-7523 injector Highest 43600 N Basic Dynamic Radial Load Rating C Quality. Certified 1.50 mm Fillet Radius ra Supplier.
- CAT
5I-7523
- 76.0 LB
- Flange Mount
- Right Hand (CW)
- 3525VQ30A21-11BB20
- 3
- Flange
- N/A
- Standard Pilot
- Denison Vane Pumps Co.,Ltd2020-07-10 09:46:19
Welcome to my shop! Glad to serve you! Please send your question!
Codes and sizes CAT 5I-7523 injector
- 1.25 in
- 14 Tooth Splined
- 3525VQ
- 1 15/16 in
- Buna-N
- 2500
- 1.04 in
- SAE C, 2 Bolt
- Single Shaft Seal
- 12/24
- 2500
- 2500
- N/A
- 21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm
- 1.248 in
- 1.247 in
- N/A
- N/A
- N/A
- 30 gal/min @ 1200 rpm, 45 gal/min @ 1800 rpm
- 3525VQ30A21-11BB20
- 3000
- 3000
- 31.5
- 45
- w/o Integral Valves
- Outlet 45° CCW from Inlet
- Outlet 90° CCW from Inlet
- 1 in Flange
- 1 1/4 in Flange
- 4.12
- 5.96
CAT 5I-7523 Technology CAT 5I-7523 injector
Cross reference CAT 5I-7523 injector | |||||||||
---|---|---|---|---|---|---|---|---|---|
No. | Brand | r | B | d | C | a | T | R | D |
WRS475233A-1 | KOYO | - | 33 mm | 47 | 37,8 kN | - | - | - | 52 |
RSU475230F-1 | KOYO | - | 30 mm | 47 | 35,1 kN | - | - | - | 52 |
EE752300/752380 | NSK | 3,3 mm | 80,962 mm | 762 mm | 2100 kN | 158,8 mm | 93,662 mm | 6,4 mm | 965,2 mm |
EE752305/752380 | NSK | 3,3 mm | 80,962 mm | 774,7 mm | 2100 kN | 158,8 mm | 93,662 mm | 6,4 mm | 965,2 mm |
FWF-475230 | NSK | - | - | 47 | 36,5 kN | - | - | - | 52 |
EE752295/752380DB | NTN | - | - | 749,3 mm | - | - | 362,32 mm | - | 965,2 mm |
F-567523 | FAG | - | 36 mm | 35 mm | - | - | - | - | 85 mm |
K475234ZWPC | KBC | - | - | 47 | 39,5 kN | - | - | - | 52 |
EE752305-90022 | TIMKEN | - | - | 30.5 Inch | 774.7 Millimeter | - | - | - | - | 38 Inch | 965.2 Millimeter |
EE752305-30000/752380-30000 | TIMKEN | - | - | 30.5 Inch | 774.7 Millimeter | - | - | - | - | 38 Inch | 965.2 Millimeter |
EE752305-904A5 | TIMKEN | - | - | - | - | - | - | - | - |
CAT 243-4502 injector | Major Diameter [Max:76.0 LB; Port Orientation - Cover End:Flange Mount; Displacement Cover End (cu in/revolution):Right Hand (CW); Minor Diameter:3525VQ30A21-11BB20; Manufacturer Part No.:3; Pilot Type:Flange; Integral Valve Configuration:N/A; Shaft End Pressure [Max:Standard Pilot; Cover End Pressure [Max:1.25 in; Rotation:14 Tooth Splined; Pump Series:3525VQ; Shaft Length:1 15/16 in; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:1.04 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:2500; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm; Major Diameter [Max:1.248 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:30 gal/min @ 1200 rpm, 45 gal/min @ 1800 rpm; Manufacturer Part No.:3525VQ30A21-11BB20; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:31.5; GPM @ 1,800 rpm, Shaft End:45; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 45° CCW from Inlet; Port Orientation - Shaft End:Outlet 90° CCW from Inlet; Pressure Port Size, Cover End:1 in Flange; Pressure Port Size, Shaft End:1 1/4 in Flange; Displacement Cover End (cu in/revolution):4.12; Displacement Shaft End (cu in/revolution):5.96; |
CAT 387-9427 injector | Port Type:76.0 LB; Shaft Seal Type:Flange Mount; Shaft End Flow @ RPM:Right Hand (CW); Rotation:3525VQ30A21-11BB20; Pressure Port Size, Cover End:3; Minor Diameter [Max:Flange; Weight:N/A; GPM @ 1,800 rpm, Cover End:Standard Pilot; Shaft Dia.:1.25 in; Integral Valve Configuration:14 Tooth Splined; Pump Series:3525VQ; Shaft Length:1 15/16 in; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:1.04 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:2500; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm; Major Diameter [Max:1.248 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:30 gal/min @ 1200 rpm, 45 gal/min @ 1800 rpm; Manufacturer Part No.:3525VQ30A21-11BB20; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:31.5; GPM @ 1,800 rpm, Shaft End:45; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 45° CCW from Inlet; Port Orientation - Shaft End:Outlet 90° CCW from Inlet; Pressure Port Size, Cover End:1 in Flange; Pressure Port Size, Shaft End:1 1/4 in Flange; Displacement Cover End (cu in/revolution):4.12; Displacement Shaft End (cu in/revolution):5.96; |
CAT 241-3239 injector | Model No.:76.0 LB; Shaft End RPM [Max:Flange Mount; Major Diameter [Max:Right Hand (CW); Shaft Seal Type:3525VQ30A21-11BB20; Mounting Flange:3; Shaft Type:Flange; Shaft Key:N/A; Shaft Length:Standard Pilot; Relief Valve Setting:1.25 in; Pilot Type:14 Tooth Splined; Pump Series:3525VQ; Shaft Length:1 15/16 in; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:1.04 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:2500; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm; Major Diameter [Max:1.248 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:30 gal/min @ 1200 rpm, 45 gal/min @ 1800 rpm; Manufacturer Part No.:3525VQ30A21-11BB20; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:31.5; GPM @ 1,800 rpm, Shaft End:45; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 45° CCW from Inlet; Port Orientation - Shaft End:Outlet 90° CCW from Inlet; Pressure Port Size, Cover End:1 in Flange; Pressure Port Size, Shaft End:1 1/4 in Flange; Displacement Cover End (cu in/revolution):4.12; Displacement Shaft End (cu in/revolution):5.96; |
CAT 328-2586 injector | Shaft Type:76.0 LB; Port Type:Flange Mount; Minor Diameter:Right Hand (CW); Minor Diameter [Max:3525VQ30A21-11BB20; Max. RPM [Max:3; Minor Diameter [Min:Flange; Port Orientation - Shaft End:N/A; Major Diameter [Min:Standard Pilot; Mounting Flange:1.25 in; Port Orientation - Cover End:14 Tooth Splined; Pump Series:3525VQ; Shaft Length:1 15/16 in; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:1.04 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:2500; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm; Major Diameter [Max:1.248 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:30 gal/min @ 1200 rpm, 45 gal/min @ 1800 rpm; Manufacturer Part No.:3525VQ30A21-11BB20; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:31.5; GPM @ 1,800 rpm, Shaft End:45; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 45° CCW from Inlet; Port Orientation - Shaft End:Outlet 90° CCW from Inlet; Pressure Port Size, Cover End:1 in Flange; Pressure Port Size, Shaft End:1 1/4 in Flange; Displacement Cover End (cu in/revolution):4.12; Displacement Shaft End (cu in/revolution):5.96; |
CAT 269-1839 injector | Major Diameter [Min:76.0 LB; Port Orientation - Cover End:Flange Mount; Cover End RPM [Max:Right Hand (CW); Displacement Shaft End (cu in/revolution):3525VQ30A21-11BB20; Max. RPM [Max:3; Shaft End Flow @ RPM:Flange; Shaft Seal Type:N/A; Minor Diameter:Standard Pilot; Pump Series:1.25 in; GPM @ 1,800 rpm, Cover End:14 Tooth Splined; Pump Series:3525VQ; Shaft Length:1 15/16 in; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:1.04 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:2500; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm; Major Diameter [Max:1.248 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:30 gal/min @ 1200 rpm, 45 gal/min @ 1800 rpm; Manufacturer Part No.:3525VQ30A21-11BB20; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:31.5; GPM @ 1,800 rpm, Shaft End:45; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 45° CCW from Inlet; Port Orientation - Shaft End:Outlet 90° CCW from Inlet; Pressure Port Size, Cover End:1 in Flange; Pressure Port Size, Shaft End:1 1/4 in Flange; Displacement Cover End (cu in/revolution):4.12; Displacement Shaft End (cu in/revolution):5.96; |
CAT 10R-7224 injector | Port Orientation - Cover End:76.0 LB; Major Diameter [Max:Flange Mount; Relief Valve Setting:Right Hand (CW); Manufacturer Part No.:3525VQ30A21-11BB20; Shaft Length:3; Model No.:Flange; Pilot Type:N/A; Port Size:Standard Pilot; Displacement Cover End (cu in/revolution):1.25 in; Displacement Shaft End (cu in/revolution):14 Tooth Splined; Pump Series:3525VQ; Shaft Length:1 15/16 in; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:1.04 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:2500; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm; Major Diameter [Max:1.248 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:30 gal/min @ 1200 rpm, 45 gal/min @ 1800 rpm; Manufacturer Part No.:3525VQ30A21-11BB20; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:31.5; GPM @ 1,800 rpm, Shaft End:45; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 45° CCW from Inlet; Port Orientation - Shaft End:Outlet 90° CCW from Inlet; Pressure Port Size, Cover End:1 in Flange; Pressure Port Size, Shaft End:1 1/4 in Flange; Displacement Cover End (cu in/revolution):4.12; Displacement Shaft End (cu in/revolution):5.96; |
CAT 387-9430 injector | Rotation:76.0 LB; Cover End RPM [Max:Flange Mount; Port Orientation - Shaft End:Right Hand (CW); Max. RPM [Max:3525VQ30A21-11BB20; Shaft End RPM [Max:3; Shaft Dia.:Flange; Relief Valve Setting:N/A; Shaft Seal Type:Standard Pilot; Port Size:1.25 in; Controlled Flow Rate:14 Tooth Splined; Pump Series:3525VQ; Shaft Length:1 15/16 in; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:1.04 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:2500; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm; Major Diameter [Max:1.248 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:30 gal/min @ 1200 rpm, 45 gal/min @ 1800 rpm; Manufacturer Part No.:3525VQ30A21-11BB20; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:31.5; GPM @ 1,800 rpm, Shaft End:45; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 45° CCW from Inlet; Port Orientation - Shaft End:Outlet 90° CCW from Inlet; Pressure Port Size, Cover End:1 in Flange; Pressure Port Size, Shaft End:1 1/4 in Flange; Displacement Cover End (cu in/revolution):4.12; Displacement Shaft End (cu in/revolution):5.96; |
CAT 238-8901 injector | Displacement Shaft End (cu in/revolution):76.0 LB; Major Diameter [Min:Flange Mount; Cover End RPM [Max:Right Hand (CW); Rotation:3525VQ30A21-11BB20; Pump Series:3; Shaft End Pressure [Max:Flange; Pressure Port Size, Shaft End:N/A; Pilot Type:Standard Pilot; GPM @ 1,800 rpm, Shaft End:1.25 in; Shaft End Flow @ RPM:14 Tooth Splined; Pump Series:3525VQ; Shaft Length:1 15/16 in; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:1.04 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:2500; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm; Major Diameter [Max:1.248 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:30 gal/min @ 1200 rpm, 45 gal/min @ 1800 rpm; Manufacturer Part No.:3525VQ30A21-11BB20; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:31.5; GPM @ 1,800 rpm, Shaft End:45; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 45° CCW from Inlet; Port Orientation - Shaft End:Outlet 90° CCW from Inlet; Pressure Port Size, Cover End:1 in Flange; Pressure Port Size, Shaft End:1 1/4 in Flange; Displacement Cover End (cu in/revolution):4.12; Displacement Shaft End (cu in/revolution):5.96; |
CAT 217-2570 injector | Shaft Length:76.0 LB; Weight:Flange Mount; Pump Series:Right Hand (CW); GPM @ 1,800 rpm, Cover End:3525VQ30A21-11BB20; Mounting Flange:3; Manufacturer Part No.:Flange; Max. RPM [Max:N/A; Integral Valve Configuration:Standard Pilot; Mounting:1.25 in; Pressure Port Size, Shaft End:14 Tooth Splined; Pump Series:3525VQ; Shaft Length:1 15/16 in; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:1.04 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:2500; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm; Major Diameter [Max:1.248 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:30 gal/min @ 1200 rpm, 45 gal/min @ 1800 rpm; Manufacturer Part No.:3525VQ30A21-11BB20; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:31.5; GPM @ 1,800 rpm, Shaft End:45; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 45° CCW from Inlet; Port Orientation - Shaft End:Outlet 90° CCW from Inlet; Pressure Port Size, Cover End:1 in Flange; Pressure Port Size, Shaft End:1 1/4 in Flange; Displacement Cover End (cu in/revolution):4.12; Displacement Shaft End (cu in/revolution):5.96; |
CAT 328-2585 injector | Displacement Shaft End (cu in/revolution):76.0 LB; Spline Description:Flange Mount; Shaft End RPM [Max:Right Hand (CW); Pressure Port Size, Shaft End:3525VQ30A21-11BB20; Shaft End Pressure [Max:3; Port Orientation - Shaft End:Flange; Pump Series:N/A; Major Diameter [Max:Standard Pilot; Mounting:1.25 in; Cover End Pressure [Max:14 Tooth Splined; Pump Series:3525VQ; Shaft Length:1 15/16 in; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:1.04 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:2500; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm; Major Diameter [Max:1.248 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:30 gal/min @ 1200 rpm, 45 gal/min @ 1800 rpm; Manufacturer Part No.:3525VQ30A21-11BB20; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:31.5; GPM @ 1,800 rpm, Shaft End:45; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 45° CCW from Inlet; Port Orientation - Shaft End:Outlet 90° CCW from Inlet; Pressure Port Size, Cover End:1 in Flange; Pressure Port Size, Shaft End:1 1/4 in Flange; Displacement Cover End (cu in/revolution):4.12; Displacement Shaft End (cu in/revolution):5.96; |
CAT 5I-7523 injector Video
Contact Us
- Denison Vane Pumps Co.,Ltd
- AddressRoute cotiere 115, Quartier industriel, Polygone 1, Casablanca, Morocco
CAT 5I-7523 Technical Articles
Can a hydraulic pump be used as a motor? |
Can I use a hydraulic motor as a pump? |
How do you get air out of hydraulic system? |
CAT injector CATEGORIES
- Rexroth PRESSURE RELIEF VALVE
- Rexroth THROTTLE VALVE
- Danfoss Shut-off valves
- Yuken Piston pump
- PAKER Piston Pump
- Rexroth check valve
- Yuken Double Vane pump
- DENISON vane pump
- Rexroth Solenoid directional valve
- Yuken single Vane pump
- Rexroth Piston Pump
- Yuken pressure valve
- Rexroth Vane pump
- CAT injector
- BOSCH injector
- CUMMINS injector
- DEUTZ injector
- COMMON RAIL injector
- Denison Vane Pumps
- High Pressure Vane Pump
- Hydraulic Gear Pump
- Hydraulic Piston Pump
- Hydraulic Vane Motor
- Hydraulic Vane Pump
- Industrial Vane Pump
- Tokimec Vane Pump
- Vickers Vane Pump
- Yuken Vane Pump