BOSCH 0445110475 injector

D1:119.7 mm; da min:77 mm; Y1:2.91; Characteristic cage frequency, FTF:0.42 Hz; Y0:2.84; Min operating temperature, Tmin:-40 °C; Y2:4.33; D:140 mm; Max operating temperature, Tmax:200 °C; Nlim:5,900 rpm;

H:181 mm; A:38 mm; T max.:100 °C; A1:18 mm; e:22 mm; N:15mm; Recommended tightening torque for set screw:8 Nm; d1:62 mm; d:44.45 mm; s1:33.4 mm;

Seal Type:Felt Type; Dimension M:100 mm; Bearing Type:Split Cylindrical Re; Note:This product line wa; Dimension H:100 mm; Cor - Static Load Rating:51931 lbf; Dimension J:290 mm; Bolt Size:2 x M20; Pillow/Plummer Block Style:Split Cylindrical Ho; Maximum Speed:2790 rpm;

Min operating temperature, Tmin:-20 °C; D:72 mm; Characteristic rolling element frequency, BSF:4.61 Hz; rs min:1.1 mm; Characteristic outer ring frequency, BPF0:3.56 Hz; Da max:65.5 mm; Nlim (grease):5,700 rpm; Static load, C0:15.3 kN; f0:13.8; ra max:1 mm;

A:25 mm; s1:15.5 mm; B:31 mm; G:R1/8"; T min.:-20 °C; A5:18.3 mm; S:12.7 mm; E:21 mm; C0:6.65 kN; H:65 mm;

Designation of bearing:UC204G2; H1:14.5 mm; A1:19 mm; T max.:100 °C; Designation of housing:PE204N-; N:11mm; A:32 mm; Recommended tightening torque for set screw:5.5 Nm; Designation of open end cover:SCO204-20; S:12.7 mm;

C0:40 kN; C:57.2 kN; Designation of open end cover:SCOU213-40; Z:82.4 mm; Dz:132 mm; Recommended tightening torque for set screw:16.8 Nm; Weight:5.8 kg; N:21mm; S:25.4 mm; Designation of housing:FLE213N-;

T min.:-20 °C; A:36.5 mm; d:22.22 mm; B:34 mm; Weight:0.61 kg; A1:24.5 mm; Designation of housing:PLE205N-; G:M6x1; L:139 mm; s1:17 mm;

m:9.8 mm; d:57.15 mm; T min.:-20 °C; C0:32.8 kN; C:24 mm; SW:4.76 mm; T max.:200 °C; S:14.9 mm; B:53.7 mm; C1:8 mm;

C90 - Dynamic Radial Rating (One-Row, 90 million revolutions)3:51400 lbf; C - Cup Width:1.8125 in; Cage Type:Stamped Steel; D:16.0000 in; G2 - Heat Generation Factor (Rib-Roller End):201; Ab - Cage-Cone Frontface Clearance:0.03 in; Cg - Geometry Factor12:0.156; T - Bearing Width across Cups:4.8125 i

Cone Part Number:HM261049; C1 - Dynamic Radial Rating (Two-Row, 1 million revolutions)1:626000 lbf; G1 - Heat Generation Factor (Roller-Raceway):3310; C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)2:162000 lbf; Aa - Cage-Cone Backface Clearance:0.22 in; C1 - Dynamic Radial Rating (

Dimension H2:15.9 in; Cr - Dynamic Load Rating:94869 lbf; Maximum Speed:1570 rpm; Cor - Static Load Rating:131513 lbf; Seal Type:Viton Single Lip; Bearing - Housing - Seal:LSE504BXHRSS; Bearing UPC:013992059239; Shaft Size:5.25 in; Dimension M:7.0 in; Dimension J:19.0 in;

Mass:0.04 kg; Radial clearance class:CN; Dynamic load, C:7.75 kN; f0:12.7; ra max:0.6 mm; Min operating temperature, Tmin:-20 °C; Da max:31 mm; Characteristic inner ring frequency, BPFI:4.39 Hz; Characteristic outer ring frequency, BPF0:2.61 Hz; Max operating temperature, Tmax:120 °C;

G:M6x1; A1:8 mm; H3:80; N:12mm; S:18.2 mm; C0:11.2 kN; Designation of open end cover:SCOE206-30; T max.:100 °C; B:36.4 mm; d:30 mm;

C0:20.8 kN; T max.:100 °C; H:53.9 mm; G:M6x1; N:M12; L:120 mm; C:31.85 kN; J:85 mm; A1:33 mm; E:22 mm;